DRX9000 Spinal Decompression in Skillman NJ

Princeton Spine Disc and Chiropractic uses the DRX9000 for lumbar disc conditions and the Chattanooga Triton DTS for cervical decompression two precision systems that go far beyond what a standard traction table can offer.

Spinal Decompression in Princeton, NJ

Watch what a real spinal decompression session looks like using our DRX9000 system, built to relieve pressure on damaged discs without surgery or medication. If you’re dealing with a herniated disc, bulging disc, or chronic back pain, this non-surgical option could help you get your life back. Schedule your evaluation today.

Non-Surgical Spinal Decompression in Skillman NJ

For patients suffering from herniated discs, bulging discs, sciatica, degenerative disc disease, or spinal stenosis, non-surgical Spinal Decompression is often the most effective long-term solution rather than a mere alternative to surgery. Using the advanced DRX9000 system, this protocol applies a computer-guided logarithmic traction force at a precise angle to a specific disc level.

This targeted process creates a controlled negative intra-discal pressure that draws herniated material back toward the center, reduces mechanical pressure on compressed nerve roots, and restores vital fluid exchange to facilitate deep tissue repair. Dr. Sojitra brings nearly two decades of clinical experience to this protocol, having successfully resolved his own 11.5mm disc herniation without surgery using this exact technology.

A man lies on a black therapy table with headphones, looking at a screen displaying an ocean scene, next to large windows.

The DRX9000: Advanced Disc Decompression Technology

Unlike basic traction tables that trigger a defensive muscular guarding response, the advanced DRX9000 system overcomes paraspinal muscle resistance through a computer-guided cycling protocol. By alternating between precise distraction and relaxation phases, it establishes the sustained negative intra-discal pressure necessary to isolate and treat the affected segment. Real-time patient monitoring automatically adjusts the parameters across the decompression series as tissue repair progresses. Furthermore, for upper cervical disc conditions, Dr. Sojitra utilizes the specialized Chattanooga Triton DTS cervical system, ensuring optimal positioning and appropriate tension parameters tailored specifically to the delicate structures of the neck.
Core Technical Advantages :
A large, gray and black DRX9000 spinal decompression machine with digital screens, control panels, and a padded treatment table, set against a black background.

What to Expect During a Spinal Decompression Session

Sessions at Princeton Spine Disc and Chiropractic are straightforward and comfortable. Here is what the process looks like:

Initial evaluation and protocol setup

Dr. Sojitra reviews Day 1 findings to identify the specific disc level and set the appropriate parameters angle, force, and cycle timing are all customized to your case.

Positioning and harness fitting

For lumbar decompression, you lie face-up fully clothed while a pelvic harness is fitted around your hips and connected to the decompression system.

The session

A slow, rhythmic distraction followed by a partial release, repeating over 20 minutes. Most patients describe it as a gentle pulling in the lower back. It is not painful many simply relax.

Post-session:

Most patients feel immediate relief or looseness in the lower back. Mild soreness in the first session or two is normal and resolves quickly.

Session frequency and protocol length

Most patients start at two to three sessions per week. Twelve sessions is a common starting point for moderate cases, with some requiring 16 to 24. Dr. Sojitra will suggest his recommendation based on your specific health exam. He evaluates progress throughout and adjusts accordingly.

Conditions Spinal Decompression Helps in Skillman NJ

Spinal decompression addresses conditions driven by disc compression and nerve involvement the structural problems that standard adjustments can influence but often cannot fully resolve on their own.

A person wearing a black face mask lies on a blue medical table, connected to a white Triton DTS spinal decompression machine via a head harness and mechanical arm.
Patients with unstable fractures, severe osteoporosis, certain spinal hardware, or active malignancy may not qualify for decompression. Dr. Sojitra screens for these conditions during the initial evaluation to ensure safety.
A man lies on his back on a black and silver spinal decompression machine in a medical office, with straps secured around his body.

Who Is a Good Candidate for Spinal Decompression?

The patients who respond best to DRX9000 decompression are those who have a confirmed disc problem and have not found lasting relief through other approaches or who want to pursue the most effective non-surgical option before considering injections or surgery.

Better Results When Combined

Decompression addresses the mechanical and structural component of disc conditions with a precision that other tools cannot match. But disc healing is a biological process, and the mechanical correction holds better and progresses faster when the inflammatory, neurological, and cellular components are addressed at the same time.
Here is what a typical care visit looks like after the initial Day 1 and Day 2 process:

Zone Technique adjustment and decompression

Adjustments help reduce protective muscle guarding around affected disc levels, allowing decompression therapy to work more effectively. Most patients also receive Zone Technique adjustments during the same treatment sequence to support better results.

Cold laser therapy and decompression

Laser therapy reduces the cellular inflammation around the compressed nerve root - the source of the burning, shooting sensation that disc patients know well. Reducing that inflammation helps the decompression correction hold between sessions and speeds the overall healing timeline.

EMTT and decompression

EMTT drives cellular regeneration inside the disc tissue itself, compounding the rehydration and healing that decompression initiates mechanically. For patients with significant disc degeneration, combining EMTT with decompression produces results that decompression alone cannot.

SoftWave and decompression

For disc cases with significant soft tissue involvement - chronic paraspinal muscle guarding, scar tissue from old injuries, or myofascial trigger points contributing to the pain pattern - SoftWave addresses the tissue component while decompression handles the structural one.

The audible pop that sometimes accompanies an adjustment is simply gas releasing from the joint capsule the same thing that happens when you crack your knuckles. It is not bones moving against each other and it is not painful. Some adjustments produce no sound at all and are equally effective.

Frequently Asked Questions About Spinal Decompression

How is the DRX9000 different from regular traction?

DRX9000 is often considered the absolute top-of-the-line decompression unit. Standard traction applies a non-specific pull to the lumbar spine. The DRX9000 targets the exact disc level using a computer-controlled angle and force, alternates between distraction and relaxation cycles to prevent muscle guarding, and monitors patient response in real time. The difference in clinical outcomes is significant.

How many sessions will I need?

Moderate herniations typically start with a 12-session protocol. More severe or long-standing cases may require 16 to 24 sessions. These are general guidelines and not law. Dr. Sojitra gives a specific recommendations for your situation on Day 2 and re-evaluates progress throughout.

Do I need an MRI before starting?
Not necessarily. Dr. Sojitra takes digital motion analysis X-rays as part of Day 1. If you have an MRI, bring it, as he reviews prior imaging as part of his assessment. Many patients begin decompression based on clinical and X-ray findings alone.
When will I start feeling results?
Many patients notice improvement in leg or arm symptoms within the first several sessions as nerve compression is reduced. Full disc healing takes longer, which is why completing the full protocol matters. Stopping after pain resolves but before the disc has stabilized is the most common reason disc problems recur.
Can I have decompression if I've already had back surgery?
In some cases, yes. Patients with prior discectomy or laminectomy may still benefit. Fusion hardware requires individual evaluation, as some are compatible with decompression at adjacent levels and others are not. Dr. Sojitra reviews surgical history on Day 1.
Still have questions? Reach out we are happy to help you figure out if this is the right fit.

Ready to Explore Non-Surgical Relief in Skillman?

The first step is a Day 1 evaluation to confirm exactly which disc is involved and whether decompression is the right fit for your specific case.